Search results

I have a very nice Sunfish circa 1976. I need to install a hiking strap and the only way to mount is to have an inspection port either behind the coming or inside the cockpit on the bulkhead where you'd affix the hiking strap. I'd like some advice here... where is the best place to install a 5"...

They have them on sale at Intensity Sail. I don't have a dolly . I don't want to spend the money on a Seintech or other top name brand if the Jotag dolly will work. Doies anyone have any experience with the dolly? I asked a couple years ago can't remember the responses because I got out of...

does the Jotag dolly come apart like a Dynmic which makes it easy to put in the back of my car?

Thanks to all who responded

Does anyone have any experience with this dolly? How does it compare to a Dynamic? Its about $100 less but wondered if it would function as well hauling my Sunfish?

I use a countdown watch

I would like to know if anyone has experience with the Jotag Dolly from Intensity Sails that fits a Sunfish and Laser. Big difference in price between Jotag and Dynamic. Can anyone lend comments on the Jotag?

I removed mine with a 1 1/8" box wrench

thanks to all who responded.

a big thank you I'll try one of them appreciate the help.

I was able to trade my nice but has a soft deck 1975 Force 5 for a 1978 original Sunfish. I hull is clean , no repairs. The PO gave me two sails , two sets of spares and one mast and a tee nee trailer. I took it out for about half an hour last night and when I came back I found that I had some...

My bailer housing , ball and seat are in good shape. When I pulled the bailer I found a flat gasket on each side of the bailer. I did not find an o ring on bailer metal housing? I did find a rock which jammed the ball open? The brass bailer inside the cockpit had an o ring missing. This keeps...

My mistake I meant 3M sealant. I am taking my time and repairing all hull areas after the dagger board trunk repair. I'll read up on never seize and see if one is compatible. I really don't sail in anything but small lakes no sea water. half and half acetone and atf I am told makes an...

on my Depiersa bailer. I did not see an o ring on the metal housing where it mounted to the hull. Is it okay to just run a bead of 5200 sealant on the metal housing and install a new round gasket where the nut tightens the bailer to the inside of the hull?? Also when I pulled my brass plug one...

I looked down the dagger board slot from the top and could see where the material is coming away not sealed and I'll start there. This forum has truly been wonderful and I went back many years and saw that some of you were original posters! So cool many of you have stuck with the forum which...

also has anyone noticed the darker slightly wet area under the scraps of foam at the rear of the dagger board?

I want to install the block I purchased a year ago and the only way to do it on the Windflite is through a port I would have to install. I decided to do this first instead of leak test because I could inspect the trunk inside and install my main sheet block. I thumped the deck listening for...

Ok I'll do this but I've never tipped the boat over or had any chance for water to get into the mast hole. I think maybe those repairs in hull or the trunk is at issue. I will follow your instructions and report back.